Test Video Triggers - Fluke 5502A Operator's Manual

Test Video Triggers

You can push the MODE softkey to move through the functions in the sequence shown,
or you can push  to return directly to the OTHER modes menu.
Each option in the Video menu is given below.
•
OUTPUT @ SCOPE terminal (50Ω) Shows the location of the signal output. If
the signal does not show on the oscilloscope, push . To disconnect the signal,
push .
•
LINE MK Lets you to select the marker line number. For ntsc and pal-m formats,
you can also select field ("odd" or "even"). For pal and secam formats, the field
("ODD" or "EVEN") is selected automatically in reference to the marker line
number.
•
FORMAT Scrolls through the available formats. You can select ntsc, pal, pal-m,
and secam.
•
MODE Shows you are in VIDEO mode. Use the softkey to change modes and open
the related menus for the other four oscilloscope calibration modes.
Default video settings are +100 %, format = NTSC, and videomark = 10.
SC600 Oscilloscope Calibration Option
9
Test Video Triggers
gjh062.eps
9-25