Fluke 5502A Operator's Manual page 107

14. The Control Display shows your voltage and frequency entries. For example,
123.456 mV and 234.567 mV at 1.1234 kHz (see below).
15. Push . The Calibrator erases your entry from the Control Display and copies
it into the Output Display (below is typical).
16. Push  to activate the Calibrator output.
Two softkey names show on the Control Display: V@NOR/V@AUX and WAVE
MENUS (see below).
•
V @ NOR (Voltage at NORMAL Terminals) V @ AUX (Voltage at AUX
Terminals) This is an information-only softkey position and does not have an related
function. It shows the output function is dual ac voltage.
Front-Panel Operation
Set Output
nn093f.eps
nn094f.eps
gvx095f.eps
4
4-33