Fluke 5502A Operator's Manual page 102

5502A
Operators Manual
At voltage outputs of 100 V and above (nominal), the Calibrator usually
makes a small high-pitched sound.
5. Push a multiplier key, if necessary. For example, push .
6. Push .
7. The Control Display shows the amplitude of your voltage entry. For example,
8. Push the numeric keys and decimal point key to record the necessary current output
9. Push a multiplier key, if necessary. For example, push .
10. Push .
11. The Control Display shows the amplitude of your voltage and current entries. For
12. Push the numeric keys and decimal point key to record the necessary frequency
13. The Control Display shows your entries. For example, 123.456 mV and 234.567 mA
4-28
123.456 mV (see below).
(maximum six numeric keys). For example, 234.567.
example, 123.456 mV and 234.567 mA (see below).
output (maximum five numeric keys). Push a multiplier key, if necessary. For
example, push the kilo multiplier key . Then push the  key. For example,
1.1234 kHz.
at 1.1234 kHz (see below).
Note
nn084f.eps
nn085f.eps
nn086f.eps