Table of Contents
Advertisement
5522A
Operators Manual
Model
Y5537
Y8021
Y8022
Y8023
Rack Mount Kit
The Y5537 rack mount kit provides all the hardware necessary to mount the 5522A on
slides in a 24-inch (61 cm) equipment rack. Instructions are provided in the kit. (To rack
mount the 5725A Amplifier, order kit Y5735.)
IEEE-488 Interface Cable
Shielded IEEE-488 cables are available in three lengths (See Table 8-1). The cables
attach to the 5522A to any other IEEE-488 device. Each cable has double 24-pin
connectors at both ends to allow stacking. Metric threaded mounting screws are provided
with each connector. Appendix D shows the pinout for the IEEE-488 connector.
RS-232 Null-Modem Cables
The PM8914/001 and RS40 null modem cables connect the 5522A SERIAL 1 FROM
HOST port to a printer, video display terminal, computer, or other serial device
configured as DTE (Data Terminal Equipment). Appendix D shows the pinouts for the
serial connectors.
5520A-525A/LEADS
The optional test lead kit, 5520A-525A/LEADS, is a kit of test leads for voltage and
current, thermocouple extension wires, thermocouple miniconnectors, and thermocouple
measuring "beads."
8-4
Table 8-1. Options and Accessories
24 in. (61 cm) Rack Mount Kit for 5522A
Shielded IEEE-488 Cable 0.5 m (1.64 ft)
Shielded IEEE-488 Cable 2 m (6.56 ft)
Shielded IEEE-488 Cable 4 m (13 ft)
Description
Advertisement
Table of Contents
