Vmps Retry - Cisco Catalyst 3030 Command Reference Manual

Blade switch
Hide thumbs Also See for Catalyst 3030:
Table of Contents

Advertisement

vmps retry

vmps retry
Use the vmps retry global configuration command to configure the per-server retry count for the VLAN
Query Protocol (VQP) client. Use the no form of this command to return to the default setting.
Syntax Description
count
Defaults
The default retry count is 3.
Command Modes
Global configuration
Command History
Release
12.2(25)SEE
Examples
This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Related Commands
Command
show vmps
Cisco Catalyst Blade Switch 3030 Command Reference
2-554
vmps retry count
no vmps retry
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
Modification
This command was introduced.
Description
Displays VQP and VMPS information.
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01

Advertisement

Table of Contents
loading

Table of Contents