Operation
6.4 Display
6.4.2
Units display
Description
The unit display comprises five 14-segment fields for representing the unit as a percentage
value, physical unit or current value. A bar graph showing the percentage measured value
range from 0 to 100% can be displayed as an alternative to the unit. The bar graph function
is disabled by default.
Display
Figure 6-2
The following messages may appear as a ticker in the bottom line of the display. They have
no influence on the current output.
Table 6- 2
Ticker
"DIAGNOSTIC WARNING"
"SIMULATION"
See also
Measured value status (Page 116)
72
Examples for measured value display for current and bar graph
Message as ticker
Meaning
Is always displayed if:
An event configured by the user is to be signaled with a
•
warning. For example:
–
Limit reached
–
Event counter for limit values exceeded
–
Calibration time expired
–
Current saturation reached
The status of one of the device variables is
•
"UNCERTAIN".
Is always displayed when the simulation of a pressure value
or temperature value is active.
Operating Instructions, 06/2013, A5E00047092-09
SITRANS P DS III with HART