Construction for level
Pressure caps and locking
•
screws
O-ring
•
Non-wetted parts materials
•
Electronics housing
Pressure cap screws
Measuring cell filling
Mounting flange fill fluid
•
Process connection
Plus side
•
Minus side
•
Electrical connection
Torque for cable gland nut made of
Degree of protection for Han and
M12 connectors
Han 8D is identical to Han 8U.
1)
11.7
Display, keyboard and auxiliary power
Display and user interface
Keys
Display
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
Stainless steel, mat. no. 1.4408
FPM (Viton)
Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision
•
casting, mat. no. 1.4408
Standard: Polyester-based paint
•
Option: 2 coats: Coat 1: epoxy-based; coat 2: polyurethane
Stainless steel nameplate
•
Stainless steel
Silicone oil
Silicon oil or a different design
Flange as per EN and ASME
/
-18 NPT female thread and flat connection with M10 fastening screw thread in
1
4
accordance with DIN 19213 (M12 for PN 420 (MAWP 6092 psi)) or
accordance with EN 61518
Screw terminals
Cable inlet using the following cable glands:
Pg 13.5
•
M20 x 1.5
•
½-14 NPT or Han 7D/Han 8D connector
•
M12 connector
•
Plastic
2.5 Nm (1.8 ft lb)
IP65
3 for on-site programming directly at the device
With or without integrated display (optional)
•
Cover with inspection window (optional)
•
11.7 Display, keyboard and auxiliary power
1)
Metal
4.2 Nm (3.1 ft lb)
Technical data
/
-20 UNF in
7
16
Stainless steel
4.2 Nm (3.1 ft lb)
199