Process Tag Data; Selecting The Measuring Modes; Overview Of Measuring Modes - Siemens SITRANS P DS III Operating Instructions Manual

Operating functions through HART

7.2 Process tag data

7.2 Process tag data
You can store your process tag data in user definable fields. The following table contains
information about the structure of these fields and the format in which you can enter
information in these fields:
Table 7- 1
Field
Tag designation
Date
Description
Message
Works number
Tag designation long
Freely definable material parameter
7.3

Selecting the measuring modes

7.3.1

Overview of measuring modes

Overview
The transmitter can be set for the corresponding measuring task using a few parameters.
You can select the following measuring modes:
● Pressure
● Level
● Flow rate
● Users: user programmable characteristic curve
You can use the measuring mode selector to activate measuring modes "Level", "Flow rate"
and "User".
Selecting the device variables
One or more device variables are permanently allocated to each measuring mode. The
following device variables are always active and are therefore always displayed:
● Pressure
● Sensor temperature
● Electronics temperature
● Pressure (untrimmed)
106
Process tag data
Explanations
Eight characters
Day:Month:Year
16 characters
32 characters
Integer number
32 characters
21 x 16 characters
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09