● The measuring cell with a process connection
● On the upper face of the enclosure you can see crosshead screws which secure the key
3.4
Nameplate layout
Nameplate with general information
The nameplate bearing the Order No. and other important information, such as design
details and technical data, is on the side of the enclosure.
①
Figure 3-3
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
enclosure. This measuring cell is secured against twisting by a retaining screw
Thanks to the modular structure of the transmitter, the measuring cell, the electronic unit
or the network card can be replaced if required.
①
cover
, under which there are 3 keys for local operation.
Order number (machine-readable product
code)
Example of a nameplate
⑥
is located in the lower section of the
②
Serial number
Description
3.4 Nameplate layout
⑤
.
23