Service and maintenance
10.2 Maintenance and repair work
NOTICE
Electrostatic-sensitive devices
The device contains electrostatic-sensitive devices (ESD). ESD can be destroyed by
voltages far too low to be detected by humans. These voltages can occur if you simply
touch a component part or the electrical connections of a module without being
electrostatically discharged. The damage to a module caused by overvoltage cannot
normally be detected immediately; it only becomes apparent after a longer period of
operating time has elapsed.
Protective measures against the discharge of static electricity:
• Make sure that no power is applied.
• Before working with modules, make sure that you discharge static from your body, for
• Devices and tools used must be free of static charge.
• Hold modules only by their edges.
• Do not touch connector pins or conductor tracks on a module with the ESD notice.
10.2
Maintenance and repair work
10.2.1
Defining the maintenance interval
No maintenance interval has been defined
Device failure, device damage, and risk of injury.
• Define a maintenance interval for regular tests in line with device use and empirical
• The maintenance interval will vary from site to site depending on corrosion resistance.
168
example by touching a grounded object.
WARNING
values.
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09