Servicing The Remote Seal Measuring System - Siemens SITRANS P DS III Operating Instructions Manual

Service and maintenance
10.3 Cleaning
10.3.1

Servicing the remote seal measuring system

The remote seal measuring system usually does not need servicing.
If the mediums are contaminated, viscous or crystallized, it could be necessary to clean the
diaphragm from time to time. Use only a soft brush and a suitable solvent to remove the
deposits from the diaphragm. Do not use corrosive cleaning agents. Prevent the diaphragm
from getting damaged due to sharp-edged tools.
NOTICE
Improper cleaning of diaphragm
Device damage. The diaphragm can be damaged.
• Do not use sharp or hard objects to clean the diaphragm.
172
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09