Description; System Configuration - Siemens SITRANS P DS III Operating Instructions Manual

Description

3.1

System configuration

Overview
The pressure transmitter can be used in a number of system configurations:
● as a stand-alone version, supplied with the necessary auxiliary power
● as part of a complex system environment, e.g. SIMATIC S7
System communication
Communication is via the HART protocol, using:
● HART Communicator (load 230 ... 1100 Ω)
● PC with HART modem, on which appropriate software is installed, e.g. SIMATIC PDM
● Control system which can communicate via the HART protocol, e.g. SIMATIC PCS7
Figure 3-1
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
(load 230 ... 500 Ω)
Possible system configurations
3
19