Checking The Consignment; Transportation And Storage - Siemens SITRANS P DS III Operating Instructions Manual

1.5

Checking the consignment

1. Check the packaging and the device for visible damage caused by inappropriate handling
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
See also
Return procedure (Page 173)
1.6

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
Special conditions for storage and transportation of the device are listed in "Technical data"
(Page 175).
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
during shipping.
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Introduction
1.5 Checking the consignment
13