History; Scope Of The Instructions - Siemens SITRANS P DS III Operating Instructions Manual

Introduction

1.3 History

1.3 History
This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition applies to the following firmware:
Edition
06/2013
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
06/2013
1.4

Scope of the instructions

Table 1- 1
Order number
7MF4033
7MF4133
7MF4233
7MF4333
7MF4433
7MF4533
7MF4633
12
Firmware identifier nameplate
FW: 11.03.03, FW: 11.03.04,
FW: 11.03.05, FW: 11.03.06
Remark
The following chapters have been changed:
"Functional safety" chapter
•
"Technical data" chapter
•
"7MF4.33" stands for:
SITRANS P, DS III series for
Gauge pressure
Gauge pressure, flush mounted diaphragm
Absolute pressure from the gauge pressure series
Absolute pressure from the differential pressure series
Differential pressure and flow rate, PN 32/160 (MAWP
464/2320 psi)
Differential pressure and flow rate, PN 420 (MAWP 6092 psi)
Level
System integration
SIMATIC PDM 8.x
Operating Instructions, 06/2013, A5E00047092-09
Installation path for PDM
SITRANS P DSIII.2
SITRANS P DS III with HART