Units; Adjusting The Units - Siemens SITRANS L LU150 Operating Instructions Manual

6.13

Units

The units of the measurement reading can be selected as follows:
1 = metres, m (factory setting)
2 = feet, ft
The selected units are also applicable to the 'Blanking' adjustment.
6.14

Adjusting the units

To change the units, go to the 'Un'' display (as described in Adjustments (Page 20)), and
proceed as follows:
1. Press the "20" key to scroll forward through the available options (1-2), and press the "4" key
to scroll backwards.
2. Once you have reached the appropriate value, stop pressing the key. The display
automatically returns to the Run mode (6 secs).
SITRANS LU150
Operating Instructions, 10/2021, A5E34590123-AC
3 Indicates that the device is now in units mode.
seconds
The current option is shown
(i.e. m)
Press "20" for option 2
(i.e. ft)
6 Option 2 has now been selected.
seconds
Operating
6.13 Units
27