Setting The Current Limits - Siemens SITRANS P DS III Operating Instructions Manual

See also
Error display (Page 73)
Limit modules (Page 138)
7.11

Setting the current limits

Description
The level of the upper and lower fault current and the high and low saturation limits can be
freely selected within the preset limits of the current output signal.
The specified accuracy of the current output signal is only valid within the current limits 4 to
20 mA.
①
②
③
④
⑤
⑥
⑦
Figure 7-12
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
Linear control range
Low saturation limit (default value)
High saturation limit (default value)
Lower fault current value (default value)
Upper fault current value (default value)
Recommended setting range for lower fault current range and lower control range limit
Recommended setting range for upper fault current range and upper control range limit
Current limits
Operating functions through HART
7.11 Setting the current limits
125