12.2 SITRANS P DS III for differential pressure, flow rate and absolute pressure from the differential pressure
series
①
Key cover
②
Blanking plug
③
Cover catch (only for "flameproof enclosure" type of protection)
④
Sealing plug, with valve (optional)
⑤
Process connection:
⑥
Electrical connection:
Pg 13.5 gland (adapter)
•
M20 x 1.5 gland
•
/
-14 NPT gland
•
1
2
Han 7D/Han 8D plug
•
M12 connector
•
⑦
Han 7D/Han 8D adapter
⑧
Connection side
⑨
Space for enclosure rotation
⑩
Electronics side, display (longer for cover with inspection window)
Take an additional 20 mm (0.79 inches) thread length into account
1)
Not with "flameproof enclosure" type of protection
2)
Not for "FM + CSA [is + XP]" type of protection
3)
For Pg 13.5 with adapter, approx 45 mm (1.77 inches)
4)
74 mm (2.9 inch) for PN ≥ 420 (MAWP ≥ 6092 psi)
5)
219 mm (8.62 inches) for PN ≥ 420 (MAWP ≥ 6092 psi)
6)
91 mm (3.6 inches) for PN ≥ 420 (MAWP ≥ 6092 psi)
7)
92 mm (3.62 inches) minimum distance for rotating the enclosure with display
8)
Figure 12-3
Pressure transmitter SITRANS P DS III for differential pressure and flow rate with caps for vertical differential
pressure lines, dimensions in mm (inches)
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
/
-18 NPT (EN 61518)
1
4
2)3)
3)
2) 3)
8)
Dimension drawings
207