Operation
6.5 Local operation
Reference
NAMUR recommendation NE43 dated 03.02.2003
"Standardization of the signal level for the breakdown information of digital transmitters"
See also
Fault current (Page 124)
Setting the current limits (Page 125)
6.5
Local operation
6.5.1
Local control elements
Introduction
The transmitter can be operated on-site using the keys. Selectable modes can be used to
choose and execute the functions described in the table. The number of available functions
is limited if the device does not have a display.
Control elements
①
②
③
Figure 6-5
76
Display
Connecting plug for the display
Mode key
Position of keys and display
④
Increment key
⑤
Decrement key
⑥
Key symbols shown in the key cover
Operating Instructions, 06/2013, A5E00047092-09
SITRANS P DS III with HART