Siemens SITRANS P DS III Operating Instructions Manual page 167

Improper connection after maintenance
Danger of explosion in areas subject to explosion hazard.
• Connect the device correctly after maintenance.
• Close the device after maintenance work.
Refer to Chapter "Connecting (Page 59)".
Use of a computer in a hazardous area
If the interface to the computer is used in the hazardous area, there is a danger of
explosion.
• Ensure that the atmosphere is explosion-free (hot work permit).
Releasing key lock
Improper modification of parameters could influence process safety.
• Make sure that only authorized personnel may cancel the key locking of devices for
Hot surfaces
Danger of burns during maintenance work on parts having surface temperatures exceeding
70 °C (158 °F).
• Take corresponding protective measures, for example by wearing protective gloves.
• After carrying out maintenance, remount touch protection measures.
Hazardous voltage with open device in versions with 4-conductor extension
Danger of electrocution when the enclosure is opened or enclosure parts are removed.
• Disconnect the device before you open the enclosure or remove enclosure parts.
• Observe the special precautionary measures if maintenance is required while the device
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
WARNING
WARNING
CAUTION
safety-related applications.
CAUTION
CAUTION
is live. Have maintenance work carried out by qualified personnel.
Service and maintenance
10.1 Basic safety instructions
167