Note
Observe the protection class of the Han plug when defining the protection class.
The contact parts for the coupling socket are also supplied.
Procedure
1. Slide the sleeve and the screwed joint on the cable.
2. Strip approx. 8 mm of the cable ends.
3. Crimp the contact parts on the cable ends.
4. Assemble the coupling socket.
Connector pin assignment with
Han 7D or Han 8D plug
See also
Technical data (Page 175)
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
I
Output current
A
U
Auxiliary power
H
Connecting
5.3 Connecting the Han plug
65