6.4.2
Units display
Description
The unit display comprises five 14-segment fields for displaying the unit as a percentage
value, physical unit or current value. Alternately to the unit, a bar graph can be displayed
which represents the percentage measurement value in the range from 0 to 100%. In the
default setting, the function which represents the bar graph is switched off.
Display
Figure 6-2
The following messages may appear as a ticker in the bottom line of the digital display. They
have no influence on the current output.
Table 6-2
Ticker
"DIAGNOSTIC WARNING"
"SIMULATION"
See also
Measured value status (Page 7-10)
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02
Examples for current and bar graph measured value display.
Message as ticker
Meaning
Is always displayed if:
An event configured by the user is to be signaled with a
•
warning.
e.g.:
Limit reached
–
Event counter for limit values exceeded
–
Calibration time expired
–
Current saturation reached
–
The status of one of the device variables changes to
•
"UNCERTAIN".
Is always displayed when the simulation of a pressure value
or temperature value is active.
Operation
6.4 Digital display
6-5