Quick Start Wizard Via Simatic Pdm; Device Description (Dd) - Siemens SITRANS LR460 HART Operating Instructions Manual

Quick Start Wizard via SIMATIC PDM

The graphical Quick Start Wizard groups together all the settings you need to make for a
simple application into 4 steps.
To use HART or PROFIBUS PA, you will need a PC configuration tool: we recommend
SIMATIC PDM.
Please consult the operating instructions or online help for details on using SIMATIC PDM.
(Application Guides for setting up Siemens PROFIBUS PA and HART instruments with
SIMATIC PDM are available on our website: www.siemens.com/processautomation.)

Device Description (DD)

You will need the DD for SIMATIC PDM version 6.0 SP3 (or higher). You can locate the
newest version of the DD via our website.
• Download the DD from the product page of our website at:
www.siemens.com/lr460, under Downloads.
• Save the files to your computer, and extract the zipped file to an easily
accessed location. These files will be used in step 2 of
device
Configuring a new device
1. Set Address (default for PROFIBUS PA is 126; for HART is 0).
• Point the handheld programmer at the display then press Mode
PROGRAM mode, menu item 1.
• Press Down ARROW
Address [menu item 2.1.2 (HART), or 2.1.1 (PROFIBUS PA)].
• Press Right ARROW
• If required, key in a new value and press Right ARROW
displays the new value and the PROGRAM icon disappears.
2. You will need the most up-to-date Device Description (DD) for your instrument.
Launch SIMATIC PDM – Manage Device Catalog, browse to the unzipped DD file
that you previously downloaded (see "Device Description (DD)" on page 31), and
select it. It will be loaded into the device catalog.
3. Launch SIMATIC Manager and create a new project for LR460. Application Guides
for setting up HART and PROFIBUS PA devices with SIMATIC PDM can be
downloaded from the product page of our website at:
www.siemens.com/lr460
4. Open the menu Device – Reset and click on Factory Defaults and click OK.
5. Upload parameters to the PC/PG.
6. Calibrate the device via the Quick Start Wizard.
A5E42035355
on page 31.
, Right ARROW
to open Edit mode: the PROGRAM icon
SITRANS LR460 – INSTRUCTION MANUAL
Configuring a new
, Right ARROW to navigate to
to accept it. The LCD
to activate
will flash.
Page 31