Description
3.1
Application
The pressure transmitter is used for measuring the gauge pressure of gases and liquids in the
following industrial areas:
• Mechanical engineering
• Power engineering
• Water supply
• Shipbuilding
• Chemical industry
• Pharmaceuticals
3.2
Hardware configuration
Device structure without explosion protection
The pressure transmitter consists of a piezo-resistive measuring cell with a diaphragm installed
in a stainless steel enclosure. It can be electrically connected using a plug complying with
EN 175301-803-A (IP65), a round plug M12 (IP67), a cable (IP67) or a fast-fit cable gland (IP67).
The output signal is between 4 and 20 mA or 0 and 10 V.
Device structure with explosion protection
The pressure transmitter consists of a piezo-resistive measuring cell with a diaphragm installed
in a stainless steel enclosure. It can be connected electrically with a connector fulfilling EN
175301-803-A (IP65) or a round plug M12 (IP67). The output signal amounts to between 4 and
20 mA.
SITRANS P210
Compact Operating Instructions, 09/2020, A5E03304388-AA
3
11