8.2 How to Manage ZyWALL/USG Firmware
This is an example of using ZyWALL/USG to check your current firmware version and upload
firmware to the ZyWALL/USG. You can upload firmware to be the Running firmware or Standby
firmware.
Figure 695 ZyWALL/USG with Firmware Management Example
Note: The firmware update can take up to five minutes. Do not turn off or reset the
ZyWALL/USG while the firmware update is in progress. This example was using
USG310 (Firmware Version: ZLD 4.13).
8.2.1 Download the Current Firmware Version from ZyXEL.com
Go to
www.zyxel.com/support/download_landing.shtml
1
package.
8.2.2 Upload the Configuration Files on the ZyWALL/USG
In the ZyWALL/USG, go to MAINTENANCE > File Manager > Firmware Package > Upload
1
File, click the To upload image file in system space pull-down menu and select (1) or (2). The
default Standby system space is (2), so if you want to upload new firmware to be the Running
firmware, then select the Running system space (1). The ZyWALL/USG will reboot automatically.
If you upload firmware to the Standby system space (2), you have the option to select Reboot
now or Don't Reboot.
Chapter 8 Maintain Your Device
ZyWALL/USG Series User's Guide
296
and download the current firmware