Figure 457
4.9.7 Test the IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click Connect
1
on the upper bar. The Status connect icon is lit when the interface is connected.
Figure 458 Hub_HQ > CONFIGURATION > VPN > IPSec VPN > VPN Connection
Figure 459 Spoke_Branch_A > CONFIGURATION > VPN > IPSec VPN > VPN Connection
Figure 460 Spoke_Branch_B > CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and the
2
Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to verify the result of
ICMP Connectivity.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
197