ZyXEL Communications ZyWALL 110 Handbook page 106

Figure 221 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear in the VPN >
6
IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec
VPN > VPN Connection screen. Click Close to exit the wizard.
Figure 222 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN Settings > Wizard
Completed
Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway and click Show Advanced
7
Settings. Configure Authentication > Peer ID Type as Any to let the ZyWALL/USG does not
require to check the identity content of the remote IPSec router.
Figure 223 CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
106