ZyXEL Communications ZyWALL 110 Handbook page 201

Figure 468 Quick Setup > VPN Setup Wizard > Welcome
Choose Express to create a VPN rule with the default phase 1 and phase 2 settings and use a pre-
2
shared key to be the authentication method. Click Next.
Figure 469 Quick Setup > VPN Setup Wizard > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway). You may use 1-31
3
alphanumeric characters. This value is case-sensitive. Click Next.
Figure 470 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN Settings-1
Type a secure Pre-Shared Key (8-32 characters). Set Local Policy to be the IP address range of
4
the network connected to the ZyWALL/USG.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
201