ZyXEL Communications ZyWALL 110 Handbook page 196

Chapter 4 Create Site-to-Site VPN Tunnels
Figure 454 CONFIGURATION > VPN > IPSec VPN > VPN Connection > Create new Object
Set Local Policy to be Spoke_Branch_B_LOCAL and Remote Policy to Hub_HQ which are
newly created. Click OK.
Figure 455 CONFIGURATION > VPN > IPSec VPN > VPN Connection > Policy
Go to Network > Routing > Policy Route to add a Policy Route to allow traffic from
3
Spoke_Branch_B to Spoke_Branch_A.
Click Create new Object and set the address to be the local network behind the
Spoke_Branch_A. Select Source Address to be the local network behind the Spoke_Branch_B.
Then, scroll down the Destination Address list to choose the newly created
Spoke_Branch_A_LOCAL address. Click OK.
Figure 456 Network > Routing > Policy Route
ZyWALL/USG Series User's Guide
196