Set Up The L2Tp Vpn Tunnel On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook
Zywall/usg series security firewalls
Hide thumbs
Also See for ZyWALL 110:
- User manual (1090 pages) ,
- Handbook (749 pages) ,
- Handbook & instructions (255 pages)
Table of Contents
Advertisement
5.2.1 Set Up the L2TP VPN Tunnel on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Quick Setup > VPN Setup Wizard, use the VPN
1
Settings for L2TP VPN Settings wizard to create a L2TP VPN rule that can be used with the
remote Android Mobile Devices. Click Next.
Figure 491 Quick Setup > VPN Setup Wizard > Welcome
Then, configure the Rule Name and set My Address to be the wan1 interface which is connected
2
to the Internet. Type a secure Pre-Shared Key (8-32 characters).
Figure 492 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings
Assign the remote users IP addresses range from 192.168.10.10 to 192.168.10.20 for use in the
3
L2TP VPN tunnel and check Allow L2TP traffic Through WAN to allow traffic from L2TP clients to
go to the Internet. Click Next.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
208
Advertisement
Table of Contents
