Figure 521
After you create a VPN configuration, slide the button right to the on position to initiate L2TP VPN
3
session.
Figure 522
5.3.3 Test the L2TP VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the Status
1
connect icon is lit when the interface is connected.
Figure 523 CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and the
2
Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to verify the result of
ICMP Connectivity.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
219