Figure 266 CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type
4.3.2 Set Up the IPSec VPN Tunnel on the FortiGate
In the FortiGate VPN > IPsec > Wizard > Custom VPN Tunnel (No Template), use the VPN
1
Setup to create a Site-to-site VPN rule Name.
Figure 267 VPN > IPsec > Wizard > Custom VPN Tunnel (No Template)
Type the Name used to identify this VPN connection, configure Remote Gateway IP as the peer
2
ZyWALL/USG's WAN IP address. Select the Interface which is connected to the Internet.
Figure 268 VPN > IPsec > Wizard > Custom VPN Tunnel (No Template) > Network
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
120