ZyXEL Communications ZyWALL 110 Handbook page 156

Figure 354 networks > NAME
Go to the Dashboard page, at the bottom of the screen, click Create Gateway. Then, select
9
Static Routing. When the system prompts for confirmation that the user wants a gateway created,
click YES.
Figure 355
10 While the gateway is being created, notice that the gateway graphic on the page changes to yellow,
and the status indicator says CREATING GATEWAY. The creation of the gateway may take up to
15 minutes. You have to wait until the process is completed before moving on and configuring other
settings.
Figure 356
11 After the gateway has been created, you can get the public IP address of the VPN gateway for the
Windows Azure virtual network. This is the peer gateway address needed for configuring the IPSec
VPN Gateway rule on the ZyWALL/USG.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
156