4.1.2 Set Up the ZyWALL/USG IPSec VPN Tunnel of Corporate Network
(Branch)
In the ZyWALL/USG, go to CONFIGURATION > Quick Setup > VPN Setup Wizard, use the VPN
1
Settings wizard to create a VPN rule that can be used with the remote ZyWALL/USG. Click Next.
Figure 224 Quick Setup > VPN Setup Wizard > Welcome
Choose Express to create a VPN rule with the default phase 1 and phase 2 settings and to use a
2
pre-shared key. Click Next.
Figure 225 Quick Setup > VPN Setup Wizard > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway). You may use 1-31
3
alphanumeric characters. This value is case-sensitive. Click Next.
Figure 226 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
107