ZyXEL Communications ZyWALL 110 Handbook page 18

Chapter 1 Set Up Your Network
Figure 11 Installation Setup Wizard > Welcome > Internet Access
Select the Authentication Type to be the authentication method by the remote node. Enter the
3
User Name and Password exactly as given by your ISP or network administrator. Select Nailed-
UP if you want to keep the connection always up or type the desired Idle Timeout value in
seconds. Click Next.
Enter the Base IP Address, IP Subnet Mask, Gateway IP Address assigned to you by your ISP.
Type the Server IP address of the PPTP Server. Click Next.
ZyWALL/USG Series User's Guide
18