ZyXEL Communications ZyWALL 110 Handbook page 216

Then, configure the Rule Name and set My Address to be the wan1 interface which is connected
2
to the Internet. Type a secure Pre-Shared Key (8-32 characters).
Figure 514 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings
Assign the remote users IP addresses range from 192.168.100.10 to 192.168.100.20 for use in the
3
L2TP VPN tunnel and check Allow L2TP traffic Through WAN to allow traffic from L2TP clients to
go to the Internet. Click Next.
Figure 515 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (L2TP VPN Settings)
This screen provides a read-only summary of the VPN tunnel. Click Save.
4
Figure 516 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The rule settings appear in the VPN > L2TP VPN
5
screen. Click Close to exit the wizard.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
216