Figure 336 VPN > Settings > VPN Policies > Proposals
Select Enable VPN and click Refresh Active.
4
Figure 337 VPN > Settings > VPN Global Settings
4.6.3 Test the IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click Connect
1
on the upper bar. The Status connect icon is lit when the interface is connected.
Figure 338 CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and the
2
Inbound(Bytes)/Outbound(Bytes) traffic.
Figure 339 MONITOR > VPN Monitor > IPSec
Go to SonicWALL VPN > VPN Settings > VPN Policies, the status green light is on.
3
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
149