ZyXEL Communications ZyWALL 110 Handbook page 167

Figure 383 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Then, configure the Secure Gateway IP as the Branch B's Gateway IP address (in the example,
4
172.16.30.1). Type a secure Pre-Shared Key (8-32 characters) which must match your Branch
B's Pre-Shared Key.
Set Local Policy to be the IP address range of the network connected to the Hub_HQ and
Remote Policy to be the IP address range of the network connected to the Branch B. Click OK.
Figure 384 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
5
Figure 385 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear in the VPN >
6
IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec
VPN > VPN Connection screen. Click Close to exit the wizard.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
167