ZyXEL Communications ZyWALL 110 Handbook page 224

Figure 536 CONFIGURATION > VPN > VPN Gateway > WIZ_L2TP_VPN > Authentication >
Certificate
Go to CONFIGURATION > VPN > L2TP VPN > Create new Object > User to add User Name
7
and Password (4-24 characters). Then, set Allowed User to the newly created object
(L2TP_Remote_Users/zyx168 in this example).
Figure 537 CONFIGURATION > VPN > L2TP VPN > Create new Object > User
Figure 538
If some of the traffic from the L2TP clients needs to go to the Internet, create a policy route to send
8
traffic from the L2TP tunnels out through a WAN trunk. Set Incoming to Tunnel and select your
L2TP VPN connection. Set the Source Address to be the L2TP address pool. Set the Next-Hop
Type to Trunk and select the appropriate WAN trunk.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
224