ZyXEL Communications ZyWALL 110 Handbook page 172

Choose Express to create a VPN rule with the default phase 1 and phase 2 settings and use a pre-
2
shared key to be the authentication method. Click Next.
Figure 396 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway). You may use 1-31
3
alphanumeric characters. This value is case-sensitive. Select the rule to be Site-to-site. Click
Next.
Figure 397 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Then, configure the Secure Gateway IP as the Hub_HQ's Gateway IP address (in the example,
4
172.16.10.1). Type a secure Pre-Shared Key (8-32 characters) which must match your
Hub_HQ's Pre-Shared Key.
Set Local Policy to be the IP address range of the network connected to the Spoke_Branch_B
and Remote Policy to be the IP address range of the network connected to the Hub_HQ. Click
OK.
Figure 398 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
5
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
172