Apply The Configuration Files On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

Figure 688 MAINTENANCE > File Manager > Configuration File
Figure 689 MAINTENANCE > File Manager > Configuration File > Copy

8.1.4 Apply the Configuration Files on the ZyWALL/USG

In the ZyWALL/USG, go to MAINTENANCE > File Manager > Configuration File, select a
1
specific configuration file to have ZyWALL/USG use it. For example, select the system-
default.conf file and click Apply to reset all of the ZyWALL/USG settings to the factory defaults. Or
select the lastgood.conf which is the most recently used (valid) configuration file that was saved
when the device last restarted. If you uploaded and applied a configuration file with an error, select
this file then click Apply to return to a valid configuration.
Figure 690 MAINTENANCE > File Manager > Configuration File
A pop-up screen will appear allowing you to edit the Target file name. Select Immediately stop
2
applying the configuration file and roll back to the previous configuration to get the
ZyWALL/USG started with a fully valid configuration file as quickly as possible. Click OK to have the
ZyWALL/USG start applying the configuration file.
Chapter 8 Maintain Your Device
ZyWALL/USG Series User's Guide
294