Set Up The Wan Trunk On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook
Zywall/usg series security firewalls
Hide thumbs
Also See for ZyWALL 110:
- User manual (1090 pages) ,
- Handbook (749 pages) ,
- Handbook & instructions (255 pages)
Table of Contents
Advertisement
Figure 663 CONFIGURATION > Interface > Ethernet > WAN2
7.3.3 Set Up the WAN Trunk on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Interface > Trunk > User Configuration >
1
Add Trunk. Configure a Name for you to identify the Trunk profile and set the Load Balancing
Algorithm field to be the Weighted Round Robin.
Add WAN1 and enter 2 in the Weight column. Add WAN2 and enter 1 in the Weight column.
Click OK to return to the Configuration screen.
Figure 664 CONFIGURATION > Interface > Trunk > User Configuration > Add Trunk
In the Configuration screen, go to Default WAN Trunk section, select User Configured Trunk
2
and select the newly created Trunk from the list box. Click Apply.
Chapter 7 Manage Your Network Traffic
ZyWALL/USG Series User's Guide
283
Advertisement
Table of Contents
