Stopping The Zywall/Usg - ZyXEL Communications ZyWALL 110 User Manual

The following table shows the default interface and zone mapping for each model at the time of
writing.
Table 15 Default Zone - Interface Mapping
ZONE / INTERFACE
• USG40
• USG40W
• USG60
• USG60W
• ZyWALL 110
• USG110
• USG210
• ZyWALL 310
• ZyWALL 1100
• USG310
• USG1100
• USG1900

3.4 Stopping the ZyWALL/USG

Always use Maintenance > Shutdown > Shutdown or the shutdown command before you turn
off the ZyWALL/USG or remove the power. Not doing so can cause the firmware to become corrupt.
Chapter 3 Hardware, Interfaces and Zones
WAN LAN1
WAN1 LAN1
WAN1_PPP
WAN1 LAN1
WAN1_PPP
WAN1 LAN1
WAN1_PPP
WAN2
WAN2_PPP
WAN1 LAN1
WAN1_PPP
WAN2
WAN2_PPP
WAN1 LAN1
WAN1_PPP
WAN2
WAN2_PPP
GE1 GE3
GE1_PPP
GE2
GE2_PPP
ZyWALL/USG Series User's Guide
56
LAN2 DMZ
LAN2 DMZ
LAN2 DMZ
LAN2 DMZ
LAN2 DMZ
LAN2 DMZ
GE4 GE5
NO
OPT DEFAULT
ZONE
OPT
OPT_PPP
OPT
OPT_PPP
OPT
OPT_PPP
GE3_PPP
GE4_PPP
GE5_PPP
G6
GE6_PPP
G7
GE7_PPP
G8
GE8_PPP