ZyXEL Communications ZyWALL 110 Handbook page 112

Figure 240 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Type a secure Pre-Shared Key (8-32 characters). Then, set Local Policy to be the IP address
4
range of the network connected to the ZyWALL/USG and Remote Policy to be the IP address
range of the network connected to the peer ZYWALL/USG.
Figure 241 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
5
Figure 242 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear in the VPN >
6
IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec
VPN > VPN Connection screen. Click Close to exit the wizard.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
112