Figure 105
Click Next, type zyx123 in the Password field and click Next again
9
Figure 106
10 Select Place all certificates in the following store and then click Browse and find Trusted
Root Certification Authorities. Click Next, then click Finish.
Figure 107
Note: Each ZyWALL/USG device has its own self-signed certificate by factory default.
When you reset to the default configuration file, the original self-signed certificate
is erased, and a new self-signed certificate will be created when the ZyWALL/USG
boots the next time.
Chapter 3 Protect Your Network with UTM
ZyWALL/USG Series User's Guide
58