ZyXEL Communications ZyWALL 110 Handbook page 135

Figure 303 Quick Setup > VPN Setup Wizard > Welcome
Choose Express to create a VPN rule with the default phase 1 and phase 2 settings and use a pre-
2
shared key to be the authentication method. Click Next.
Figure 304 Quick Setup > VPN Setup Wizard > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway). You may use 1-31
3
alphanumeric characters. This value is case-sensitive. Select the rule to be Site-to-site. Click
Next.
Figure 305 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Configure Secure Gateway IP as the WatchGuard's WAN IP address (in the example,
4
172.100.30.63). Then, type a secure Pre-Shared Key (8-32 characters).
Set Local Policy to be the IP address range of the network connected to the ZyWALL/USG and
Remote Policy to be the IP address range of the network connected to the WatchGuard. Click OK.
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
135