www.zyxel.com
Apply the Configuration Files on the ZyWALL/USG
In the ZyWALL/USG, go to MAINTENANCE > File Manager > Configuration File,
select a specific configuration file to have ZyWALL/USG use it. For example, select
the system-default.conf file and click Apply to reset all of the ZyWALL/USG settings
to the factory defaults. Or select the lastgood.conf which is the most recently used
(valid) configuration file that was saved when the device last restarted. If you
uploaded and applied a configuration file with an error, select this file then click
Apply to return to a valid configuration.
MAINTENANCE > File Manager > Configuration File
638/749