Monitoring Servopack Status; System Monitor; Monitoring Status And Operations - YASKAWA SGD7S Product Manual

9.2

Monitoring SERVOPACK Status

9.2.1

System Monitor

Use one of the following methods to display the System Monitor Window.
• Start the SigmaWin+. The System Monitor Window will be automatically displayed.
• Select Monitor - Monitor - System Monitor from the menu bar of the Main Window of the
SigmaWin+.
If this check box is selected, this window will be displayed
automatically when the SigmaWin+ starts.
9.2.2

Monitoring Status and Operations

Use the following method to display the SERVOPACK's Status Monitor Window or Motion Mon-
itor Window.
• Select Monitor - Monitor - Status Monitor or Monitor - Monitor - Motion Monitor from
the menu bar of the Main Window of the SigmaWin+.
If these check boxes are selected, the current values are displayed in the Value column.

9.2 Monitoring SERVOPACK Status

9.2.1 System Monitor

The current signal status of the SERVOPACK is
displayed. (This information is the same as the
information that is displayed for the bit data on
the panel display on the front of the SERVO-
PACK and the information that is displayed on
the Digital Operator display.)
The current status of the SERVOPACK is dis-
played. (The information that is displayed is the
same as the information that is displayed on the
panel display on the front of the SERVOPACK.)
9
9-3