8.7 Autotuning with a Host Reference
8.7.4 Operating Procedure
8.7.4
Operating Procedure
Use the following procedure to perform autotuning with a host reference.
1.
Confirm that the moment of inertia ratio (Pn103) is set correctly.
2.
Select Tuning - Tuning from the menu bar of the Main Window of the SigmaWin+.
The Tuning Dialog Box will be displayed.
Click the Cancel Button to cancel tuning.
3.
Click the Execute Button.
4.
Click the OK Button.
5.
Select the Position reference input Option in the Autotuning Area and then click the
Autotuning Button.
8-36