Status Indicators (Leds); Switch Settings - YASKAWA 264IF-01 User Manual

2.4.2 Status Indicators (LEDs)

The following table shows the status of the 264IF-01 Module indicated by the LED indicators.
RUN ERR
NS
L/A1
L/A2

2.4.3 Switch Settings

The following table shows the switches mounted on the 264IF-01 Module.
(Switch No.)
-
TEST
OFF ON
 Always set the unused switches (No. 3, 4) to OFF.
Table 2.4 Status Indicators (LEDs)
Indicator Color Meaning When Lit
RUN Green Operating normally
ERR Red –
EtherCAT communica-
Green tion status
NS
• OPERATIONAL
Red –
L/A1 Green Link up
L/A2 Green Link up
Table 2.5 Switch Settings
Label
Name
– Program loading selection
(2) at shipment
TEST
Operating mode selection
(1)

2.4.2 Status Indicators (LEDs)

Meaning When Flashing
–
Hardware error
EtherCAT communication
status
• PRE-OPERATIONAL
flashing (500 ms)
• SAFE-OPERATIONAL
flashing (1 s)
–
Transmission in progress
Transmission in progress
Status Function
ON
Reserved by the system.
Normal operation mode (Always set to
OFF
OFF.)
ON
TEST mode
Normal operation mode (Always set to
OFF
OFF.)
2.4 Overview
Meaning When Not Lit
–
Normal
EtherCAT communica-
tion status
• INIT
–
Link down
Link down
Factory
Setting
OFF
OFF
2
2-9