Ipfix Configuration On Ers 8600 & Ers 8300; Enabling Ipfix Globally And On A Port Level - Avaya 4500 Technical Configuration Manual

2. IPFIX Configuration on ERS 8600 & ERS
8300:

2.1 Enabling IPFIX globally and on a port level

To enable or disable IPFIX globally, enter the following command.
CLI:

ERS-Switch(config)# ip ipfix enable

ERS-Switch(config)# no ip ipfix enable
PPCLI:

ERS-Switch# config ip ipfix state <enable|disable>
To enable IPFIX on a port level, enter the following command:
CLI:

ERS-Switch(config)# interface < FastEthernet| GigabitEthernet> <slot/port>

ERS-Switch(config-if)# ip ipfix enable
PPCLI:

ERS-Switch# config ip ipfix port <slot|port> all-traffic enable
Additional port parameters specific to ERS 8600 and ERS 8300
CLI:

ERS8600(config-if)# ip ipfix ?
enable
hash-key
hash-polynomial-coeffs
hash-polynomial-seed
port
sampling-rate

ERS8300(config-if)# ip ipfix ?
enable
port
PPCLI:

ERS-8600# config ip ipfix port <slot|port> ?
Sub-Context:
Current Context:
all-traffic
flush [export-and-flush]
hash-key
hash-polynomial
info
sampling-rate
To enable ipfix
To set hash-key
To set hash-polynomial-coeff
To set hash-polynomial-seed
Ipfix configuation on a specified port
To set sampling rate
To enable ipfix
Ipfix configuation on a specified port
<enable|disable>
<id>
[coeffs <value>] [seed <value>]
<1-100000>
Avaya Inc. – External Distribution
avaya.com
7